1, Quad band 850/900/1800/1900MHz 2, Support PSTN function( two extensions line /phone) 3, two trigger input 12V +, - 4, Text message notification 5, Text content changeabl 6, Simple to install and easy to maintain 7, Steady QUECTEL MD2510 GSM module & reliable design ensures good performance 8, Attractive Plastic casing 9, SIM card support(3V,5V) 10, Suitable for all kinds of weather & environment
Default password is 1234. admin can send SMS order 1234CP8888(8888 is new password) to the device, then you will get a reply message CP8888, it means change password has been successful
Press and hold on the reset key,then connect to power,the 3 LED indicators go off,that means the default password has been reset.
Send SMS order1234? to the terminal,then it will reply you SMS:
Copy and paste the content of SMS by adding number, then send back to the terminal,it will reply youSAVE OK
It means that it save user number successfully.
TEL 2: 13801138001
Mode of Trigger
1)TRIG1 +: positive 12 volt trigger
Whenever Trig1 + connect to positive 12V terminal will be send ON by SMS
Whenever Trig1 + disconnect to positive 12V terminal will be sendOFF by SMS
2)TRIG2:- Negative 12 volt trigger
Whenever Trig 2- connect to negative 12V terminal will be send ON by SMS
Whenever Trig 2- disconnect to negative 12V terminal will be send OFFby SMS
Use this input for power cut notification
It needs inter-mediate circuit for using this trigger
Change Text Message of Two Triggers
Terminal has specific test SMS for each trigger
1)Trigger 1 +
For example, Trigger 1+ will send SMSONwhen it was triggered.
Users can change the content of SMS by sendingSMS to terminal( less than 40 characters).